Provides an interface to power on and power off the NVIDIA DRIVE Orin™
SoC.
Provides an interface to set the GPIO pins for Boot-chain of NVIDIA Orin SoC while
powering on.
This is a stateless (independent of IST, SC7) Component as it acts on the commands
from other SWCs on MCU, which might hold the states and state management.
Detects HW Error scenarios like HW power-up failure detection via PG Signal from
VRS10/11/12 and NVIDIA Orin rails, and the power-on is aborted.
Implements safety-related latent fault detection requirements for VRS10 and VRS11.
Supports safe shutdown of NVIDIA Orin.
During power-Off/ Reset request, Power Manager waits for Handshake GPIO to be set
before powering off the VRS10.
A timeout of 20 seconds is provided in case the GPIO is not asserted.
Needs a Platform Power Management Software Component (provided as a reference code),
which invokes the APIs provided by NVIDIA Orin Power Manager. The same requests are provided
by the shell commands also.
Provides interfaces for SC7 entry and exit transitions. Implements the hardware-level
triggers to manage the SC7 entry and exit sequence of NVIDIA Orin.