Jump to main content
DRIVE OS for DRIVE AGX
NVIDIA DRIVE OS 6.0 Linux SDK Developer Guide
Search
Home
Bootloader Programming
Customizing Quickboot
Using I2C Controller
Overview
Installation
Setup and Configuration
Flashing
Embedded Software Components
System Software Components and Interfaces
Understanding Security
System Programming
Bootloader Programming
Understanding the Boot Flow Process
Customizing Quickboot
Compression Options
Compiling
Using Interactive Mode
Forcing Boot from the Kernel Recovery Partition
Configuring the Serial Console Baud Rate
Using I2C Controller
To register other I2C controllers in the DTB:
Quickboot Device Tree
Using the Bootloader Recovery Mechanism
Ratcheting
Ratchet Checks
Rachet Fuse Programming
Passing Ratchet Status to Guest OSes
Lock Fuse Burning
Passing Customer Data to Guest OSes
Configuring MB1 Boot Configuration Table
Mass Storage Partition Configuration
NVIDIA DRIVE Utilities
Manifest
API Reference
NVIDIA DRIVE OS
6.0
Third-Party Software Licenses
Legal Information
Using I2C Controller
By default in QB DTB, only I2C-0 is registered.
To register other I2C controllers in the DTB: