To boot after flashing#

  1. Upon first boot after flashing, run the drive-setup.sh script from a terminal window on the target to set up the necessary packages.

sudo /<root>/drive-setup.sh install-run-once-pkgs

  1. Once the run-once installation is completed, reboot the NVIDIA DRIVE® Development Platform from the UART serial console.

sudo reboot

After the reboot, the desktop displays the welcome page.

Note

If multiple monitors are connected, you can use the xfce display setting to configure the screen settings and layout.

If a login is required, the default password for the account is nvidia.

Run startx& in the SoC console if no xfce desktop is displayed.