Running in Session Mode

This command causes mnand_rfsh to issue refreshes every 20 seconds until the target refresh progress is achieved, and then to re-estimate after one hour:

./mnand_rfsh -d /dev/mnand<id> -t 06102011103800 -p
 ./mnand_rfsh.log -S 20 –s 3600

Where <id> identifies the mNAND device.

The following command is similar except that it prints output:

./mnand_rfsh -d /dev/mnand<id> -t 06102011103800 -p
 ./mnand_rfsh.log  -S 20 –s 3600 -v 2