APX Driver Set Up

When installing Jetpack SDKs from a Windows host, an APX driver is required on the device so SDK Manager can detect the board.

If the APX driver is not installed, please follow the steps below to install it.

Installation Steps

1. Download required files:
zadig-2.9.exe zadig.ini

• Place both zadig-2.9.exe and zadig.ini in the same folder.
2. Set Device to Recovery Mode:
• Ensure your Jetson device is in Recovery Mode before proceeding.
3. Run zadig and Install the Driver:
• Launch zadig-2.9.exe.
• Select the "APX" device from the device list.
• Make sure the target driver is set to WinUSB.
• Click "Install Driver".